Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Clearwater, FL | Mortons Air Duct Tampa
We clean and seal Trane duct systems throughout Clearwater, and our Air Duct Cleaning in Clearwater treats salt and humidity as the actual problem, not just dust. You’ll get a written price before anything starts, and the crew that shows up understands the specific ways Trane equipment fails in a coastal climate. If you’ve noticed musty air, weak airflow, or mold on your supply vents, call us at (850) 738-9748 and we’ll walk you through what’s likely happening before we even schedule the visit.
We’re an independent Trane service provider, not a factory-authorized dealer. Paul Adeyemi, our owner, trained at Los Angeles Trade-Technical College in HVAC and ventilation systems and has spent years working inside Trane ductwork across Tampa Bay. That background matters when a homeowner asks why their Trane system is behaving strangely in Clearwater specifically. Most of the time, the answer isn’t the condenser outside. It’s inside the attic.
Why Clearwater Residents Choose Us for Trane Service
Because we know the equipment, and we know what the Gulf does to it. Trane builds tight, well-engineered systems, but Clearwater’s year-round humidity above 70% and the salt aerosol rolling off the Gulf create failure modes you won’t find in Orlando or Lakeland. Our field techs have opened hundreds of Trane duct systems across Pinellas County and know the model-specific seams, plenum transitions, and coil drain pan designs that hold salt, dust, and mold. We service them as an independent crew, not through a dealer portal, which means we recommend what the home actually needs, not what a manufacturer program tells us to sell.
Our technicians are background-checked, arrive in uniform, and work to the Cedarwell Care Promise on every job. That means shoe covers and drop cloths before the first tool comes off the truck, quieter equipment when a toddler is napping down the hall, and pet-safe product choices wherever they’re available. Paul has a habit of drawing a quick duct diagram for curious homeowners. Before we move anything, I’ll show you what we found. It’s not a sales pitch. It’s just how he works.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Clearwater
- Salt-air corrosion on aluminum discharge plenums. In seafront neighborhoods like Clearwater Beach and Island Estates, stamped aluminum discharge plenums develop pinhole leaks from chronic salt exposure. Those pinholes pull humid attic air into the return duct path, which means your Trane system is conditioning attic air before it ever reaches the rooms you live in.
- Mold blooms on Trane Comfort-R supply runs. Trane’s Comfort-R ramp profile runs at lower airflow for the first several minutes, which is great for dehumidification but slow airflow leaves condensation sitting inside uninsulated flex connectors. Add Clearwater’s ambient humidity and you get visible mold at supply registers, especially in 1950s and 1960s concrete-block ranch homes with original sheet-metal ductwork.
- Fiberglass shedding from Trane Alumaseal duct-board transitions. Homes built or retrofitted in the 2000s often have Trane Alumaseal transitions that break down at the cleat joints after years of 70%+ relative humidity. The joints separate, fiberglass particles shed into the airstream, and you’ll see gray dust accumulating on registers that never quite wipes away.
- Evaporator coil pan overflow on Trane Hyperion air handlers. The TAM7 and TAM8 Hyperion units have shallow primary drain pans. When Clearwater’s humidity loads the coil with condensate and the primary drain clogs, water spills into the return duct matrix. That wetted ductboard is a petri dish for microbial growth, and it spreads musty odor through every register.
- Sagging flex-duct retrofits pulling attic air. Many Clearwater condos and older homes have flex-duct retrofits run through hot attics. The flex sags between strapping points, pulls apart at the collars, and draws humid, dusty attic air into the system. You’ll notice certain rooms never cool evenly, and the AC runs longer than it should.
Trane Service in Clearwater: What Local Conditions Mean for Your Equipment
Clearwater Beach east of Mandalay Avenue sits on a barrier island where prevailing Gulf breezes push salt aerosol into attic-ducted Trane air handlers. Our techs routinely find the return-air chase behind the hallway grille caked with a gritty salt-and-lint paste that you won’t see five miles inland. That paste is the signature of Clearwater’s coastal air, and it does two things to a Trane system. First, the salt accelerates corrosion on galvanized seams and aluminum tape, which causes joints to separate and leak. Second, the paste holds moisture, which feeds mold and dust mites even inside a system that looks clean from the register side. We vacuum the salt crystals, treat the duct surfaces, and reseal the joints with materials matched to a coastal environment.
A 1972 concrete-block ranch on Island Way in Island Estates had a Trane XL16i split with original metal supply trunks. Our crew peeled back the foil facing and found a fine salt film that had eaten through the aluminum tape at the trunk takeoffs, so the system was pulling humid attic air through six separated joints. We vacuumed the salt crystals, hit the ducts with an antimicrobial fog, and resealed every takeoff with butyl-backed aluminum tape and mastic, then verified no ghost losses with a smoke puffer test. That’s the difference between cleaning ducts and actually fixing what a Clearwater climate does to them.
Trane Models & Products We Service in Clearwater
We work on the Trane systems most common in Clearwater’s older and newer housing stock: the XR13 split system still running on R-22 in many original 1970s homes, the single and two-stage XL16i in newer concrete-block construction, the XR95 gas furnace with evaporator coil in condos where gas heat pairs with central air, and the Hyperion TAM7 and TAM8 air handlers found in coastal high-rises. For resealing Trane plenums, we use factory-spec galvanized sheet-metal fittings and mastic rather than aftermarket duct-board. But when salt corrosion has already started on the register boots, we recommend marine-grade aluminum replacements that won’t rust through in two seasons. And if a Trane fan-coil housing or heat exchanger is severely corroded, we’ll tell you the honest truth: replacement beats polishing a shell that Clearwater’s air will eat again.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Clearwater
Air duct cleaning for a typical Clearwater home, whether it’s a 1960s ranch near Downtown or a condo off Gulf-to-Bay, generally runs $350 to $700 for a full system. If the job includes duct sealing, flex-duct repair, or evaporator coil cleaning, the total can reach $900 to $1,400 depending on system size and how much of the ductwork needs attention. A written price is provided before any work starts, every time, no exceptions. The estimate covers exactly what will be cleaned, what will be sealed, and what the crew will protect inside your home. Call (850) 738-9748 and we’ll get you a number you can plan around.
Serving Clearwater, FL - Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Clearwater
Black staining on Trane supply vents in Clearwater’s concrete-block homes usually traces back to condensation inside the duct run, not dust. The block walls stay cool, the attic side stays hot, and the temperature differential makes moisture condense on the inside of uninsulated metal ducts. That moisture feeds mold at the register. We clean the supply runs and address the condensation point, whether that means sealing leaks or adding insulation, so the mold doesn’t return in the same spot. Call (850) 738-9748 and we’ll inspect what’s happening at your registers.
Yes. The outdoor condenser gets the visual corrosion, but the salt aerosol that gets pulled into attic ducts settles on seams, tape, and plenum joints. We’ve seen Trane systems where the condenser coils look fine while the duct takeoffs above the air handler have failing tape and pinhole leaks from salt exposure. The damage is invisible until you know where to look. A duct inspection with a camera will show you exactly what the salt has done, and we quote repairs as part of the written estimate.
If your home was built or had HVAC work done in the 2000s and you see persistent gray dust around your registers, it’s worth investigating. Trane Alumaseal duct-board transitions break down at the cleat joints after years of Clearwater humidity, and the loose fiberglass sheds into your supply air. We can seal the failing joints or replace the transition sections with galvanized sheet metal, depending on what the camera inspection shows. It’s a common fix in homes from that era. Call (850) 738-9748 for an exact assessment.
Most Clearwater homes do well with air duct cleaning every 3 to 4 years, which is more frequent than inland Florida’s typical 5 to 7 year interval. The humidity and salt load here mean mold and corrosion build up faster, and the duct system gets wetter more often. Homes within a mile of the Gulf or with pets and kids may want cleaning every 2 to 3 years. We’ll tell you honestly what your system needs after the inspection, not before.
Seal after cleaning. If you seal first, you’ll trap whatever is already inside the ducts behind the sealant. We vacuum and fog first, then seal the joints using butyl-backed aluminum tape and mastic on factory-spec galvanized fittings, which holds up better in salt air than standard aluminum tape. For rusted register boots in beachside Clearwater homes, we recommend marine-grade aluminum replacements. The written estimate covers all of it before work begins, so you’ll know the plan and the price up front.
Service Areas Near Clearwater
Our crews serve Clearwater and the surrounding Pinellas County cities, including Largo, Safety Harbor, Dunedin, and Clearwater Beach. We also handle Trane work across the bay in Trane service in Tampa and up through Trane service in Wesley Chapel. If you’re in the wider Bay area, our Clearwater service area page covers where we travel and what to expect on a visit. For more about our overall Trane experience, see Trane sales & service.
Book Your Trane Service in Clearwater Today
We’ll put you in touch with a real person, give you a written estimate before anything starts, and protect your floors and furniture on every visit. Our crews serve Clearwater year-round and our 365-Day Done Right Promise guarantees the job is done right or we make it right. Call (850) 738-9748 to schedule your free estimate.
Written by Paul Adeyemi, Owner at Mortons Air Duct Tampa, serving Clearwater since 2005.