Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Clearwater
Dryer vent cleaning in Clearwater, FL typically costs $139 – $289 for a standard single-family home, and most jobs are completed the same day we arrive. What makes Clearwater different from inland cities is the salt air. Vents here don’t just fill with lint – they corrode from the inside, and that changes how we clean, inspect, and seal every run. Our crews know the difference between a routine lint pull in Pinellas Park and a salt-crusted vent behind a 1960s ranch in Island Estates, because we’ve worked both for years.
If your dryer is taking two cycles to finish a load, or the laundry room feels muggy mid-cycle, call us at (850) 738-9748. We’ll give you a written price before any work starts, and we’ll show you photos of what we found inside your vent – before and after.
Why Mortons Air Duct Tampa Is Clearwater’s Preferred Dryer Vent Cleaning Company
Clearwater homeowners call us because we explain exactly what we’ll do, what it will cost, and what we found when we’re done. No drama, no mystery invoice. Paul Adeyemi leads our team with a simple rule: if the job isn’t done right, we make it right – that’s the 365-Day Done Right Promise, stamped on every visit.
Our technicians arrive in uniform, with shoe covers and drop cloths in hand before they touch a door. We work quietly when a toddler is napping down the hall, and we keep pets safe by using pet-safe products where available. When we leave, you get a photo of the clean-up. That’s not an add-on – it’s how every job closes.
We’re part of the Cedarwell family of independently owned companies, and every visit is held to the Cedarwell Care Promise. For Clearwater specifically, that means a tech who knows salt-corroded duct joints from a mile away, not someone reading a script from a call center.
Styles & brands we work with
Dryer Vent Cleaning Service in Clearwater
A Dryer Vent Cleaning Service in Clearwater starts with a camera inspection of the full vent run, from the dryer collar to the exterior termination. In Clearwater’s salt-heavy air, we’re looking for more than lint: we’re checking for corroded seams, failed aluminum tape, and backdraft dampers that no longer seal. Then we source-remove the lint with a Rotobrush system, pulling debris toward the collection unit rather than blowing it into your attic or laundry room. Most single-family homes in Clearwater run $139 – $289, and the price is written down before we start.
Camera Inspection and Lint Removal
We run a camera through the vent before cleaning and again after. You see exactly what was inside, and exactly what came out. On older Clearwater homes – especially 1950s and 1960s concrete-block construction – we regularly find hidden disconnections where salt corrosion ate through galvanized seams.
Sealing and Re-Seating Connections
Cleaning a vent is step one. If the joints aren’t sealed after, humid Gulf air keeps pulling into the run and undoing the work within months. We re-seat and seal any connection that’s loose, corroded, or leaking, so the vent moves air the way it should.
Dryer Vent Installation in Clearwater
Dryer Vent Installation in Clearwater is a common request in beachside condos and older ranches alike, because salt corrosion eventually makes replacement cheaper than repeated repairs. If your vent is galvanized and more than 15 years old, or if the existing run sags through an uninsulated attic, we’ll recommend a new rigid-metal or 4-inch aluminum run with properly supported joints. Clearwater jobs typically run $199 – $449 for full replacement, depending on the length of run and the termination style.
Corroded Vent Replacement
In Island Estates and Clearwater Beach, we often replace vents that look fine from the outside and are nearly gone from the inside. Salt film corrodes the seams first, creating air leaks that pull humid air into the lint path. A new vent, correctly sealed, restores full airflow and cuts dry times noticeably.
Backdraft Damper and Vent Cap Upgrades
Clearwater’s sea breeze is constant, which means a failed backdraft damper lets salt-laden air push into the dryer between cycles. We install and seal proper dampers and vent caps that close firmly against the Gulf wind, protecting both the vent and the dryer itself.
Trusted Brands We Service in Clearwater
Our systems work with equipment from Nikro and Rotobrush, the same professional brands used by certified duct and vent technicians. If your Clearwater home has a Honeywell or Aprilaire accessory tied into the dryer exhaust path, we service and integrate those too. We keep commonly needed parts on the truck – vent caps, dampers, aluminum tape, flex-to-rigid adapters – so most Clearwater jobs don’t require a second visit for parts.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Clearwater Homes
- Salt-corroded vent joints: Gulf salt aerosol eats galvanized seams, causing hidden disconnections that pull humid air into the vent and make lint clump faster than it should. This isn’t typical dust buildup – it’s corrosion-driven failure.
- Damp lint in uninsulated attic runs: Clearwater’s humidity above 70% means condensation forms on vent runs that pass through unconditioned attics. Lint absorbs that moisture and becomes a dense, moldy mass that blocks airflow quickly.
- Failed backdraft dampers: Near the water, dampers corrode and stop sealing, letting salt air backflow into the dryer. Homeowners notice ghost airflow – weak venting that seems fine on inspection but performs poorly in real conditions.
- Flex-duct sagging and kinking: Many Clearwater attics use flex duct for the exhaust run. Over time, heat and humidity soften it, and it sags or kinks, trapping lint and reducing vent efficiency by half or more before anyone notices.
Pricing for Dryer Vent Cleaning in Clearwater, FL
You should know what you’re paying before anyone touches your dryer. A standard dryer vent cleaning in Clearwater runs $139 – $289 for most single-family homes. Condos and longer runs can run a bit higher, especially on upper floors where accessing the exterior termination takes more time. Full vent replacement, when the salt has done too much damage to repair, typically runs $199 – $449 depending on run length and termination type. There are no per-vent add-ons, no fogging upsells, and no surprise charges on the invoice. Call (850) 738-9748 for a free written estimate.
We Also Serve Cities Near Clearwater
Our crews work throughout the Clearwater area regularly, including Dryer Vent Cleaning in Clearwater, Largo, Safety Harbor, Dunedin, and Pinellas Park. If you’re in a coastal neighborhood or an inland ranch, we’ll give you the same direct pricing and the same 365-Day Done Right Promise.
Serving Clearwater, FL - Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Clearwater
Clearwater homes near the Gulf typically need dryer vent cleaning every 8 – 12 months, compared to every 12 – 18 months inland. Salt aerosol accelerates corrosion of metal vent joints, and the constant humidity turns lint into a damp, sticky mass that restricts airflow faster. If you’re within a mile of the water, lean toward the shorter interval. Call (850) 738-9748 to schedule a camera inspection and get a clear answer for your specific home.
The lint trap catches only a fraction of what the dryer produces, and in Clearwater’s summer humidity, what escapes into the vent becomes damp and clings to the duct walls instead of blowing through. Outdoor humidity above 70% means condensation forms inside any vent section that isn’t perfectly insulated. That damp lint dries into a hard cake that narrows the vent far faster than dry lint ever could.
No. Fogging sanitizers sprayed into a dryer vent do not remove the source problem – lint and corrosion. In Clearwater, the real work is removing wet, salt-laden lint and sealing corroded joints. A fogged vent still has the blockage; it just smells like chemicals for a few days. We don’t offer fogging because it doesn’t solve what’s actually wrong.
Most Clearwater Beach condos allow vent replacement without a full HOA vote, but many require a licensed contractor’s signature on the proposal and approval from the building maintenance manager. We know the drill for most buildings in Clearwater Beach and Island Estates, and we can provide whatever documentation your association needs. Call (850) 738-9748 and we’ll walk you through it.
The leading cause is blocked airflow from lint accumulation combined with corroded vent joints that leak and let humid air worsen the blockage. In Clearwater’s coastal microclimate, that combination happens faster than in inland cities. Regular cleaning and joint inspection are the two most effective things any homeowner can do – and both are included in our standard service.
Call (850) 738-9748 today for a free estimate on dryer vent cleaning in Clearwater. You’ll speak to a live person, get a written price before work begins, and see photos of the job before we leave.
Written by Paul Adeyemi, Owner at Mortons Air Duct Tampa, serving Clearwater since 2005.